Pull Up Banner

December 15, 2014

Pull Up Banners also go by the names Pop Up Banners, and Banner Bugs, doubtless there are other names as well. I like Pull Up because that is what you do with them, you pull them up.

I have decided to reduce my range of pull up banner units to one. I’ve tried different pull ups over the years, and eventually had problems. I know that there are cheaper options out there, and that other printers are selling them for less than me, and that’s fine. I think I’ve finally found a unit that I like. It not the cheapest unit around, but it is also not the most expensive.

Introducing my new premium pull up banner.

There are a few features of the new premium unit that I quite like because they address the varied problems that have cropped up over the years with the cheaper base units.

Base Unit

No little feet! The base unit is nice and wide, so there are no feet that need to be rotated. No more problems with the unit standing straight or with the feet snapping off! It makes the unit bulkier and simpler.

Top Rail & Hook

The top rail has small lug nuts across it’s width that holds the graphic in place. The nuts push against a self adhesive bar that it already stuck to the graphic. There is no way the graphic will come loose.
Check out the hook, it is a nice big robust hook that slots into a a deep channel in the top bar. Over the years I’ve seen pull up banners come apart when the graphic pulls loose of the top rail, and get broken with the hook pulls loose. That will never happen with this pull up banner.

Bag & Pole

Those little units I used to sell had a cavity in the back of the unit where you could kind of fit the pole into. It never quite worked for me, and was always a little bit of a wrestle. This unit doesn’t even try. The bag has a additional pocket that holds the rod, makes it very easy to fit everything in, and gives you some extra room if you need to carry anything else with your pull up banner.

 

2 comments

  1. Hi

    I was wondering if it was possible tp purchase only the hook for the Pull up Banner. The diameter of the hook needs to be 2cm. If you have this would it be possible to purchase at what would the price be?

    Regards
    Malene

  2. Hi Malene,
    DO you mean just the hook at the top of the pole?
    I have sent you an email.

    Thanks,
    Daniel.

Leave a comment

Your email address will not be published. Required fields are marked *

My Customers

0
    0
    Your Cart
    Your cart is emptyReturn to Shop